Some tumble dryer models have “automatic” transit bolts on the drum. When you start the appliance for the first time you will hear a bump indicating that the transit bolts have been released. This is perfectly normal and not a malfunction of the machine.
How do you remove the bolts from an LG dryer?
The first are for shipping bolts attached to the rear of your washing machine. If the bolts are still there, remove them by using the wrench provided with your washer. Loosen the bolts by turning them counterclockwise. Once loosened pull them out.
Are shipping bolts necessary?
The shipping bolts keep the tub secure during a move and reduce the amount of vibration that could damage the suspension. If you do not have the necessary shipping bolts, you can purchase them through an appliance repair center.
Can you transport an LG dryer on its side?
When moving a dryer, it is important to take care to move it properly. Protect the exterior of the appliance. … It does not harm the dryer to lay it on its side or back during transporting. Exception: Unitized washer/dryer models should only be transported / moved in an upright position.Can I move a washing machine without the transit bolts?
Moving a washing machine without transit bolts will run the serious risk of damaging your machine, so we strongly advise against it. … However, you must remember to remove the transit bolts once your move is complete, as they can seriously damage your machine should you begin a wash cycle with them still in place.
How many shipping bolts does an LG washer have?
Note: This product has to be paired with the 4011FR3159E 4.75 inch shipping bolt (x2) for a total of 4 bolts on most LG washers.
Do LG top load washers have shipping bolts?
Answer Hello Tony, top load washers do not use shipping bolts , only front load washers do.
How do you move a washing machine without shipping bolts?
Impact of Moving A Front Load Washer Without Shipping Bolts: You can fill it with the help of the furniture blankets. You can remove the power cord and drain hoses, then wrap the washer with some dolly straps and then load it onto the dolly or truck for transport.What happens if you don't remove shipping bolts from washing machine?
The shipping bolts clamp the spring suspension system into a locked position and hence prevent it from being damaged during transit. If you don’t remove them, it will have no suspension system so will vibrate VERY badly when you run it.
Can I lay LG washer on its side?It’s recommended you always keep a washing machine in an upright position. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension. It can also cause the tubs to move out of alignment and alter the way your unit works.
Article first time published onHow do you transport an LG washing machine?
- Slide your front-load washer away from the wall far enough to access the power cord. …
- Place a bucket on the floor behind your washer. …
- Move your washer from the laundry room. …
- Find the shipping bolts that were removed when your washer was first delivered.
How do you secure a washing machine drum for transport?
Preventing a washing machine’s drum from excessive motion during your move will protect the suspension from breaking. You can do this by securing the drum with shipping bolts or transit bolts. These metal rods are inserted into special slots in the rear of the washer to secure the drum.
Do top loaders have shipping bolts?
Top-loaders usually require you to wedge foam or cardboard between the drum and the case. For a front-loader, you’ll typically insert shipping bolts in the rear of the washer to secure the drum. If you no longer have the original locks, contact the manufacturer to purchase some.
How do you transport a top loading washing machine?
Transporting your washer: Place inlet hoses inside washer basket. Drape power cord and drain hose over the console and secure with masking tape. Place foam packing ring from original shipping materials back inside the washer. If you do not have a packing ring, place heavy blankets or towels into basket opening.
Do Whirlpool washers have shipping bolts?
The Front Load Washer Shipping Bolt Kit can be used whenever you need to move the appliance from one location to another. The kit includes (2) short bolts and (2) longer bolts that hold the wash tub and basket in place so that the washer can safely be transported without damage.
How do you install transit bolts?
By sliding the bolt, the bare end of the transit bolt shaft will find the attachment hole on the washing machine drum and literally insert itself. Once inserted, begin screwing the bolt in. Tighten down the bolt with the wrench. The tub will stabilize more after each bolt is installed.
