How deep should kitchen shelves be

As far as shelf size, a depth of 10 or 12 inches fits most functions without concern of drooping in the middle, while length should be determined based on where you want to install yours. If you want a long span but are concerned about weight, install adjacent, identical floating shelves, or opt for bracket supports.

What is a good depth for floating shelves?

For example, if you are floating a bookshelf, typically your shelf won’t need to be deeper than 10″ since most books are less than 9″ deep. If you are floating kitchen shelves, 12″ usually works since most cabinets and the plates, cups, and bowls they house, are 12″ or less deep.

How thick should floating shelves in kitchen be?

As mentioned in our answer, the ideal thickness for a floating wooden shelf would be 2 inches. Anything less, and there’s a higher possibility that your shelf may snap when loaded with objects. Note also that it’s assumed that the wood you are using is made out of hardwood.

How deep should my shelves be?

Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.

How wide should a shelf be for plates?

This is also the perfect minimum depth for displaying cookbooks. Measure your daily essentials that you plan to display in your kitchen and plan from there. Typical dinner plates range from 9″-12″. Open shelving units typically range from 10″-24″.

What is the average depth of built in shelves?

Most shelves are built a minimum of 11 to 12 inches deep, but this is your chance to customize: Go for it!

How thick should open kitchen shelves be?

Many retail shelving options come in depths as small as 4″. Those are best in a bathroom or hallway. For kitchens, you want to have a depth of at least 10 inches. This is important if you want to store dinner plates or other wider items on your shelving.

What is the average space between shelves?

Average Shelf Spacing A good average spacing for shelves is between 8 and 12 inches. If you have oversize books to store, you might prefer to increase the spacing to 15 inches.

How thick are shelves usually?

How deep should the shelves be? Typically, bookshelves are 11 to 12 inches deep, but if you are building your own bookshelves, this is your opportunity to customize your shelves to fit your books. If you have a lot of oversized books, measure the largest one, and add 1 to 2 inches to the depth.

How thick should shelf boards be?

Plywood for shelves should be 3/4 inch thick or thicker. Standard sheets of plywood come in 1/4-inch, 3/8-inch, 1/2-inch, 5/8-inch, and 3/4-inch thicknesses. Plywood panels over 3/4 inch in thickness are usually special order products.

Article first time published on

How deep are standard kitchen cabinets?

Standard kitchen cabinet heights include 12, 15, 18, 30, 36 and 42 inches tall; depth ranges from 12 to 18 inches. Typically installed 18 inches above countertops, 54 inches above floor and 24 inches above stove.

How far apart should bookshelves be?

Most open or floating shelves in the living room, kitchen, or bedroom have a distance of 8 to 12 inches between each. However, a gap of 7 to 15 inches between shelves is permissible. For bookcases, shelves are usually 8 to 12 inches from one another.

What is a good shelf height?

How High Should I Hang My Shelf or Shelves? Like artwork, shelves should be hung at about eye level or about 4 to 5 feet from the floor. If you’re hanging the shelf above furniture, measure about 10 inches from the top of the desk or couch.

What thickness ply for shelves?

As a general rule, the heavier the items you will be placing on the shelves, the thicker the recommended product will need to be. The most common size used in shelving is a 3/4 inch thickness.

Is 12mm plywood strong enough for shelves?

It is not so strong as solid timber and will tend to sag except under a very light load. Use 12mm chipboard as a minimum and support the shelf at no greater than 300mm centres for all but the lightest of loads.

How deep should upper kitchen cabinets be?

Standard wall cabinets (sometimes referred to as “upper cabinets”) are 12 inches deep; standard base (below-counter) cabinets are 24 inches deep.

Are all kitchen cabinets 24 inches deep?

Standard Base Cabinet Sizes The cabinets vary from 6″ to 42″ based on the usage of the cabinet. Depth: The depth of base cabinets without the countertop typically measures 24 inches. Adding the countertop will create an overhang between one to two inches.

How much space should be between upper and lower cabinets?

The standard distance between the top of a kitchen counter and the bottom of the wall cabinets above it is 18 inches. For the average person, this distance is the ideal balance between plenty of space to work on the countertop and the ability to reach all of the shelves in the cabinet.

How much should a shelf overhang?

Keep overhangs at each shelf end to 8 inches or less. Lighter loads can be held by supports screwed into every other stud at 32-inch intervals. Limit shelf overhangs to no more than 12 inches. Masonry walls require inserting either expansion shields or lead anchors.

How thick should plywood be for pantry shelves?

You can use nominal one-inch pine boards for pantry shelves, or 1/2 inch plywood, as long as you don’t make it excessively long. Particle board and OSB are not ideal, and reinforcement on all four sides is absolutely necessary with those. Pantry shelves need to be fairly strong, as canned goods can be fairly heavy.

What material is used for kitchen shelves?

Solid wood also makes an excellent shelf material. Maple is easy to stain and can be customized to match your decor. Cherry is lightweight yet strong and easy to cut. Birch is another solid wood that works well for shelves and shelving units, especially if you want to paint the finished pieces.