How do I choose a miter saw

Blade size is an important consideration in selecting a miter saw. The most common miter saw sizes are 8, 10 and 12 inches. Keep in mind that larger diameter blades can make longer cuts. Positive stops are factory set points that let you quickly make precise cuts on specific angles.

How do I know what miter saw to buy?

What is the most versatile miter saw?

Without a doubt, a dual compound sliding miter saw delivers the most versatility. Depending on what you cut, you’re likely to get the most benefit and capacity from a 10-inch or 12-inch model. Once you choose, the next step is to practice how to use a miter saw like a Pro.

What is the difference between dual bevel and compound miter saw?

Simply put, single bevel miter saw possesses a saw head that only rotates (bevels) in one single direction (generally to the left). A dual bevel miter saw has a saw head that rotates in both directions, typically 0° – 48° both left and right, and can make bevel cuts in both directions.

Can a miter saw cut a 4x4?

It may surprise you to know that the answer in question to cutting 4×4 posts with a miter saw is a hard, YES! … Sliding miter saws have more range of motion, because you can tilt the head of the miter saw forwards. This obviously tilts the blade forward, thus increasing the cutting capacity of the miter saw.

Can a 10 inch sliding miter saw cut a 2x8?

Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees. Saws also differ by whether the blade arm simply rotates (a basic miter saw) or both swings and slides (a sliding miter saw).

How much does a good miter saw cost?

A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.

Is a double bevel miter saw worth it?

If you have multiple bevel cuts to make, then a double bevel miter saw is absolutely worth it.

How wide can a 12-inch miter saw cut?

Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights. This larger saw can cut a maximum thickness of 3 1/2 inches, enough to cut through four-by-fours.

What is the difference between sliding and non sliding miter saw?

Well, put simply, a sliding miter saw contains rails, with the blade able to move both forwards and backwards thanks to these rails. A non-sliding miter saw doesn’t have these rails and the option to slide.

Article first time published on

What is the difference between a miter cut and a bevel cut?

The first step of learning how to use a miter saw is to understand the difference between a miter cut and a bevel cut. A miter is an angled cut made across the face, or width, of a board. A bevel is an angled cut made through the thickness of a board.

Which miter saw is the most accurate?

The Metabo HPT MultiVolt 7-1/4″ dual bevel miter saw is one of the best-built, smoothest, and most accurate miter saws we’ve had the pleasure of testing. It comes with a premium price tag, but definitely makes sense for woodworkers and carpenters who really need portability.

What is dual bevel miter saw?

Dual-Bevel Compound Miter Saws. The blade angles of a dual bevel miter saw can adjust to both the left and right, as opposed to just one side, like the single bevel saw. … Double bevel miter saws allow you to make precise and uniform cuts on both sides of your workpiece.

Which sliding miter saw is best?

The best sliding miter saw is the Bosch Power Tools GCM12SD 12 Inch Sliding Glide Miter Saw. All of the sliding miter saws we’ve reviewed can produce crosscuts, bevel cuts, and miter cuts easily. Some can even produce compound cuts. But the Bosch sliding miter saw has some features that made it particularly stand out.

Can you cut sleepers with a Mitre saw?

With nice square edges you’ll be fine cutting from both sides with a circular saw, especially if you’re not trying to do anything fancier than cut them to length.

Which is correct mitre or miter?

A mitre, also spelled miter, is a term applied to the presence of controlled precision cuts. Mitre joint refers to the presence of these cuts for achieving a functional lap joint, but mitre can also be used to refer to the guiding device attached to the saw that was used in making the cuts.

Are Delta miter saws any good?

As the newest addition to the line, the Delta Cruzer miter saw is a solid performer. The almost frictionless guide system and the front adjusting bevel settings make this a saw to contend with. … Whether cross-cutting stair treads or burning through some 8-inch crown molding, a quality miter saw is a money maker.

What's the difference between a chop saw and a miter saw?

Whereas chop saws are rugged and relatively simple tools, mitre saws are designed and manufactured to make precision cuts at many different angles. Although a mitre saw can cut non-ferrous metal when used with the correct blade, they are most often used by joiners, kitchen fitters and cabinet makers to cut wood.

Are sliding miter saws accurate?

Chop-cutting accuracy at 90° was on par with other saws at 1/256 inch in 4 inches and slide accuracy was good at 1/128 inch in 12 inches. While the 90° straight cuts were good, slide miter cuts were only fair. The blade shows some measurable and visible wobble and the head has some deflection.

What is bevel cut?

Bevel Cuts Conversely, a bevel cut allows the blade to tilt left and/or right from its 90˚ angle to the table surface in order to make cuts that move through the board at an angle from top to bottom. A bevel cut changes the vertical angle of the blade. It no longer remains at 90 degrees (square) to the base.

Are miter saw and table saw blades interchangeable?

Yes, you can. However, since your miter-saw blade is thin-kerf, you might need to change the tablesaw’s splitter. If the splitter is thicker than the blade, the workpiece will get caught on it and you’ll be unable to feed it through.

How long can a sliding miter saw cut?

Sliding compound-miter saws will work just like chop saws, but because their blades move back and forth on horizontal rails, they also can slice stock up to 15 inches wide in one stroke.

What does single bevel Broadhead mean?

A single bevel broadhead is only ground on one side (opposing sides of the blade). Our single bevel is right side bevel. Double bevel heads are our number one seller and highly recommend by dead animals all over the globe.

What is a single bevel Broadhead?

A single bevel broadhead is sharpened on only one side of each edge; the opposite edge remains flat. … A single bevel broadhead will begin to “twist” or rotate upon impact due to the reaction of the single bevel against meat or bone.

What angle is a miter cut?

A mitre joint (often miter in American English) is a joint made by cutting each of two parts to be joined, across the main surface, usually at a 45° angle, to form a corner, usually to form a 90° angle, though it can comprise any angle greater than 0 degrees.

When you are cutting wood with a table saw should the good side be facing up or down?

Your plywood should be oriented so that the blade exits the wood on the good face. So for a circular saw and miter saw, make your cuts with the good face down; on the table saw, with the good face up.

What is Dewalt XPS technology?

Essentially XPS technology uses an LED to project light down either side of the blade, creating a shadow of the blade in the work area. As the blade lowers, the shadow sharpens, darkens and shows exactly how wide the cut will be once it’s made.