How do I connect to AquaLink

If the process fails, the iAquaLink device will need to have its memory cleared by physically toggling the WiFi-Wired switch to Wired then back to WiFi. This will restart setup mode so you may attempt to connect it to your eero network again.

Why is my AquaLink not connecting?

If the process fails, the iAquaLink device will need to have its memory cleared by physically toggling the WiFi-Wired switch to Wired then back to WiFi. This will restart setup mode so you may attempt to connect it to your eero network again.

How do I connect my iAquaLink iq900 to WiFi?

Remove the two (2) screws from the cover of the iAquaLink antenna. Remove the gasket and cover.
Locate the WiFi/Wired switch and ensure it is in the WiFi position.
Using a USB cable, connect the iAquaLink antenna to an Internet enabled computer.

How do I connect my Astro AquaLink?

Ensure all power to the AquaLink power center is off. …
Guide the connector and wire through to the rear of the power center board.
Pull the connector between the PC board & the metal brace, and connect it to the red 4-pin socket as shown.
Up to two devices can be connected to one 4-pin socket (two wires per hole).

How do I reset my iAquaLink WiFi?

Inside the iAquaLink 2.0, toggle the WiFi – Wired switch to clear the Wi-Fi settings and put the iAquaLink in desired setup mode. 3. After clearing the WiFi settings and with the Wired/ WiFi switch set to WiFi, use a smartphone or WiFi enabled device and go to WiFi settings.

How do I program my Jandy AquaLink?

Basic Programming: To set a particular piece of equipment to turn on and off at a predetermined time, press the MENU button, press the forward arrow button to scroll to the PROGRAM menu, press ENTER, and then press the button for the equipment that you want to program.

How do I reset my Iaqualink password?

Note that if you have an invalid or non-working email address, you will not be able to reset your password and will need to call our Customer Experience team at (800) 822-7933 to reset your account.

How do I reset my Jandy AquaLink?

Press the “Menu” button.
Scroll to and highlight “System Setup” using the arrow keys. Press “Enter.”
Scroll to highlight “Clear Memory,” then press “Enter.” You have now reset your AquaLink system.

How do I connect my iAqualink to Google home?

Browse to your Home Assistant instance.
In the sidebar click on Configuration.
From the configuration menu select: Integrations.
In the bottom right, click on the Add Integration button.
From the list, search and select “Jandy iAqualink”.
Follow the instruction on screen to complete the set up.

How do I find my Aqualink device number?

Enter the iAquaLink device number found on the door hanger or the device itself. To add the iAquaLink device to an account, you must be connected to the web through the same router the iAquaLink device is connected to.

Article first time published on

Does Jandy pool have an app?

Using our free app for your smartphone or web-connected device, you can control all the elements of your pool or pool/spa system, even when you’re on the go. … Free apps for Apple® and Android™ smartphones and tablets. Mobile web-app works on virtually any other smart device.

What does 6700 Rev C mean?

If the “6700 REV C” code DOES appear, then the problem is at least in either the POWER CENTER or WIRING between the power center or remote, but it is possible that the original remote failed, too – we have seen the Power Center and Remote fail simultaneously.

Does iAquaLink work with Alexa?

iAquaLink voice control will work with Echo Dot, Echo, Echo Plus, or any Alexa-enabled smart speakers.

How do I reset my Jandy pool lights?

To synchronize multiple lights to the same color mode, you will need to reset to the beginning of the color mode sequence. With the lights ON, turn them OFF for five (5) seconds, then turn ON again. All of the lights will reset to the Alpine White color mode.

How much is a Jandy pool heater?

Jandy Legacy gas powered pool heaters come in full range of power from 125K to 400K BTU inputs, with 19 models on the market. The prices are starting from the $1400 for the least powerful units and finishing with $3600.

What is a pool relay?

The standard relay which comes with the automated control system will simply turn your light on and off. Valve Actuator Sensors. These are used to measure the temperature of air, water and solar and feed this information back to your automated control system.

How do you read a Jandy serial number?

The serial# is on a white tag on the bottom of the power supply. For example, serial number CM3 01 06 13 86 can be read as follows: CM3 means it is a ClorMatic III, 01 is the year, 06 is the month, 13 is the day and 86 is the unit manufactured that day. installation.

Can I control my pool with my phone?

iAquaLink allows pool owners to control their pools anytime, anywhere. The application is free and is available on the Apple and Android markets. … Just sync the iAquaLink with your home network, install the app, and you’re ready to control your pool from your smartphone device or tablet.

Is Jandy and Zodiac the same company?

Jandy Pool Products is a developer, manufacturer and marketer of innovative pool products sold under the Jandy® brand. Jandy was acquired by Carlyle (80%) and the Zodiac Group (20%) in April 2006.