Having the Smart device (Phone, Tablet) connected to the same Wi-Fi as B-hyve™ during setup may cause them to compete for connection. … Make sure Wi-Fi is not hidden and other devices can clearly see and connect to Wi-Fi. 10. If previous steps have not resolved issue Reset Wi-Fi Router and start setup again.
Why is my B-hyve not connecting?
Having the Smart device (Phone, Tablet) connected to the same Wi-Fi as B-hyve™ during setup may cause them to compete for connection. … Make sure Wi-Fi is not hidden and other devices can clearly see and connect to Wi-Fi. 10. If previous steps have not resolved issue Reset Wi-Fi Router and start setup again.
How do I reset my orbit sprinkler controller?
Reset to Factory Default – Orbit Irrigation B-hyve Help. To reset your timer back to factory settings: Turn the timer to the OFF position by rotating the dial. Open the front panel and press the reset button for 10 seconds.
Does B-hyve use Bluetooth?
-You will need to be in Bluetooth range (about 50 ft) in order to use the B-hyve Hose Faucet Controller. -You won’t have access to our Smart Watering feature.Where is reset button on orbit?
- Push the “Reset” button (located in the bottom-right corner) to clear all previously programmed data if you’re programming the Orbit sprinkler timer for the first time.
- Twist the dial to “Time/Date” to set the date. …
- Twist the dial to “Start Times (A)” to adjust the watering schedule for program A.
How do I reconnect to Wi-fi?
- Open your phone’s Settings app.
- Tap Network & internet. …
- At the end of the list, tap Add network.
How do I connect my Bhyve to my phone?
First, put your timer into “Pair Mode” by pressing the B-hyve button 5 times rapidly, or if you are using the B-hyve Indoor/Outdoor timer then hold the reset button that is located on the backside of the timers face down for 10-12 seconds. In your app, tap “My B-hyve” and then Devices.
Why isn't my orbit sprinkler system working?
If one or more of the sprinklers is still not working, contact the installer of the system, as you may have an issue with the hardware. Remove any dirt or debris from the valve of a sprinkler that will not shut off once turned on, as foreign items in the sprinkler may cause it to stick, instructs Sol Vida Landscaping.Can you use Bhyve without WIFI?
Your timer works with and without wifi–it can be programmed with your smart device or at the timer interface .
How do you troubleshoot an orbit sprinkler system?- Check the programming settings if one or more stations are not turning on. …
- Check the valves in the ground sprinkler controls if some of the stations are not working. …
- Check the Station Delay settings if sprinklers are not turning on when they are programmed to.
How does orbit B-HYVE work?
The basics of the B-Hyve Connect it to your Wi-Fi and download the B-Hyve app, and you’ll be able to control your sprinklers with your phone. The B-Hyve also monitors the local weather, and will schedule your sprinklers for you if you’d like. Like most smart sprinklers, it’s approved by the EPA WaterSense program.
How do I connect Bhyve to Alexa?
To use Alexa with B-hyve, you will need to activate the B-hyve Alexa skill. Within the Alexa application, the Alexa Skill can be found by searching for Orbit or Bhyve. 4. Scroll down and tap the drop-down under Alexa Device and select your B-hyve device.
Why is my phone not connecting to Wi-Fi?
Reset your phone’s network and OS settings Restarting your phone can clear glitches and help it reconnect to Wi-Fi. If your phone still won’t connect, then it’s time to do some resetting. In the Settings app, go to “General Management.” There, tap “Reset.” … Your phone will restart — try connecting to Wi-Fi again.
Why have I lost my Wi-Fi connection?
There are a lot of possible reasons for why your internet isn’t working. Your router or modem may be out of date, your DNS cache or IP address may be experiencing a glitch, or your internet service provider could be experiencing outages in your area. The problem could be as simple as a faulty Ethernet cable.
What do you do when your iPhone won't connect to Wi-Fi?
- Make sure Wi-Fi is on. …
- Check if Airplane Mode is on. …
- Check if the Wi-Fi network is password protected. …
- Check for iOS updates. …
- Restart your iPhone. …
- Reset iPhone network settings. …
- Turn off location services. …
- Restore your iPhone to factory settings.
How do I connect my phone to Wi-fi?
- Open the Settings app. It’s found in the apps drawer, but you’ll also find a shortcut in the quick actions drawer.
- Choose Wi-Fi or Wireless & Networks. …
- Choose a wireless network from the list. …
- If prompted, type the network password. …
- Touch the Connect button.
Why is my network not showing up?
Properly restart the modem and router. Power cycling the router and modem can fix internet connectivity issues and resolve problems with wireless connections. It is important to reboot both the modem and the wireless router. Check to see if the network is hidden.
How do I connect to a device on the same network?
Connect your devices to any of the 4 LAN ports (Local Area Network – facing your house). If you have only one Ethernet port, get an Ethernet switch. They’re about $20 to $25 for a 5-port switch. Connect the router to any port on the switch.
How do you program a orbit 6 sprinkler timer?
- Turn the dial to “Cycle Start Times.”
- Press the “+” or “-” to set the start time.
- Press “Enter” to confirm the start time.
- Press “Next” to set the start time for each additional program, following the same procedure.
How do you test orbit sprinkler valves?
- Turn the dial to the “Auto” position and press the “Manual” key to test the valves on Easy Dial and Easy Set Orbit timers. …
- Turn the dial to the “Auto” position and move the slide switch for the desired valve up to the “Manual On” position to test valves on Orbit’s “Individual Station Slide” timers.
What is fault program on Orbit timer?
A fault message appearing on your timer or phone means that your B-hyve device is detecting a short in one of the station wires or solenoid attached to the B-hyve device. Typically this will happen with older valves or if you have multiple valves attached to one terminal of the B-hyve device.
