How do I turn on my Phantom 4

Once the controller is on, make sure that the plastic camera holder is removed from the landing gear, then turn the Phantom 4 battery on by tapping once and holding it down (just like on the remote). At this point, the Phantom 4 should be booting up and you should hear 3 beeping sounds coming from the motors.

How do I turn on my Phantom 4 Pro?

Power on Remote Controller.
Power on Aircraft.
Connect Device to Remote Controller. Connect USB to Device. Connect USB to Remote Controller.
Launch DJI GO 4 App.
Read Terms of Use Carefully.
Name Your Aircraft.
Select Your Control Mode.
Customise Your Buttons.

How do I turn on my DJI drone controller?

Press once the power button on the remote controller, then again and hold to turn on it, when the indicator light on. The remote controller is start. Long press the button until the light off, the remote controller is closed.

How do I turn on my Phantom?

Start by placing the Phantom 2 on the ground with the Battery Level Indicator facing yourself. > Switch on the Remote Controller. > Turn on the flight battery. > Pull both sticks on the remote controller to bottom corners as shown to start/stop the motors.

How do I turn off my phantom 4 Pro?

Press once to check the battery level. Press once, then again and hold to turn on/off.

Why is my DJI remote not turning on?

The Remote Controller Will Not Turn On Turning on the controller is a common issue for users. Try firmly pushing the power button once and release. Then, quickly press power again and hold the button for about three to four seconds until the controller turns on.

How do I turn on my drone controller?

Both devices turn on by pressing the power button once, then pressing again and holding it down. On the Mavic, the lights will show a powering up sequence. On the controller you will hear a power up sound. After a few seconds, you should see a picture of the Mavic Pro on the DJI GO app.

How do you sync a remote to a drone?

Launch the operating app for the drone, tap enter device, then camera view, and select the remote control settings to link. Press and hold the function button, then release it. The drone will beep, and when the linking is successful, both the drone and the controller will produce a green light.

How do I connect my phone to my Phantom 4?

If you’re using a smartphone, unfold the supporting arms (3) as well. Place your mobile device into the holder and secure it by pressing down the clamp. Plug the small end of the provided USB cable into your mobile device. Then plug the other end of the same cable into the USB port on the rear of the remote control.

How do I reset my phantom 4 remote?

have the controller off and press down C1+C2+red record button (top left) + right wheel button in (top right). now turn the controller on and keep holding for about 5 seconds all the 4 buttons. now release. controller is reset.

Article first time published on

Why won't my DJI drone connect?

Here are the most common reasons why your drone won’t connect to the controller: The battery power might be too low on the drone or the controller. It could be an issue with the software on the remote controller. The problem could be with the application used to connect the drone.

How do I connect my DJI go 4?

Download the DJI Go 4 app on your phone. …
Connect the phone to the controller. …
Look for the Wi-Fi credentials found on one of the arms of your drone. …
Toggle the drone to Wi-Fi. …
Turn the drone on. …
Connect the drone to your phone via the DJI Go 4 app.

How do I turn off my drone?

Press the power button once, and then again and hold to turn the remote controller off. All in all, turning off DJI drones is quite simple and can be done in the same way for all models. Just press the power button once, and then again and hold, and your DJI drone will turn off.

What is an RTK drone?

Real-time kinematic (RTK) processing on a drone records GPS information and geotags images as they’re captured during flight. The GPS location is recorded for the center of each image. While the drone is in flight, an active base station on the ground sends it raw GPS data.