BrandGyprocProduct weight23.7kgProduct thickness12.5mmR-value (thermal resistance)0.07m²K/WStandardEN520:2004+A12009
What does 13mm plasterboard weigh?
Nominal Board Weight*8.5kg/m2CombustibilityIn accordance with BCA Clause C1.12, Gyprock Standard 13mm may be used wherever a non-combustible material is required by the Code.Total Recycled Content3.7%
How much does a sheet of 9.5 mm plasterboard weight?
BrandGyprocProduct weight10.9kgProduct thickness9.5mmStandardEN520:2004+A12009MaterialGypsum
What is the density of drywall?
MaterialDensity3/8 inch Gypsum or Plaster Board1.56 lb/ft27.62 kg/m21/2 inch Gypsum or Plaster Board2.08 lb/ft210.2 kg/m25/8 inch Gypsum or Plaster Board2.60 lb/ft212.7 kg/m2Ice, crushed37.0 lb/ft3593 kg/m3Can you get 20mm plasterboard?
20mm Knauf Fireboard is a fleece-lined high performance square-edge plasterboard that provides up to two hours of fire protection in structural steel encasement.
What does 10mm Gyprock weigh?
Nominal Board Weight*5.7kg/m2Thermal Performance: R-Value0.07 m2K/WFire Hazard: assessed to AS/NZS3837 cone calorimeter testAverage Specific Extinction Area (ASEA) <250m2/kg Group Number 1 Report Reference WFRA 45759
What is the fire rating of 12.5 mm plasterboard?
In the British Gypsum White Book such an arrangement with a 12.5mm fire line/board would give a 30 minute rating from the room/corridor side of the ceiling.
Is plasterboard a standard thickness?
Most plasterboard has a thickness of 9.5mm or 12mm. … For a standard wall, you should purchase plasterboard with a thickness of 12mm and for a ceiling, the preferable thickness of drywall is around 12.5mm. For a bathroom ceiling, you should choose a plasterboard with a thickness of either 12mm or 12.5mm.Can you use 10mm gyprock for ceilings?
Standard Gyprock plasterboard or moisture resistant plasterboards such as Gyprock Aquachek can be used for exterior ceilings and eaves lining, provided the ceilings are protected from the weather. A 10mm thick sheet primarily designed for residential walls.
How heavy is a sheet of drywall?The main difference between ultralight and standard drywall is, obviously, the weight. A conventional 1/2-inch thick sheet of drywall measuring 4 x 8 feet weighs around 57 pounds. According to drywall maker USG, a 4 x 8-foot sheet of Sheetrock brand UltraLight Panel weighs 13 pounds less, for a total of 44 pounds.
Article first time published onWhat is the density of building materials?
S.No.Construction MaterialsDensity (Kg/m3)39Bricks1500-180040Asphalt72141Cement144042Cement mortar2080
What's the density of sand?
Dry sand itself has a density of 1602 kg / m3.
How heavy is a pallet of plasterboard?
Weight1700 kgEdgeTapered Edge, Square Edge
Is 9mm plasterboard OK for walls?
No The 9.5mm is normally for walls. You will need your studs or joists at much closer centres for 9mm board. On new homes we use 15mm for ceilings as you can get away with 600mm centres and no noggins are required. Although it is heavier and more expensive I would always use 12.5mm board over 9.5mm.
What is 9.5 mm plasterboard used for?
9.5mm Knauf Wallboard is strong, versatile and great value plasterboard providing key cladding component in the majority of partitions, linings and ceilings.
Can I paint straight onto plasterboard?
You can paint straight onto/over plasterboard in most cases, you simply need to cover the joints and any holes created by your fixings first. Being able to paint directly onto the surface of the new wall is convenient and saves time and money. You can also plaster over painted plasterboard at a later stage.
What is the thickest plasterboard?
The most common plasterboard thickness is 9.5mm and 12.5mm. For ceilings is used 9.5mm thick plasterboard and for walls – 12.5mm.
Can you get 6mm plasterboard?
6mm Siniat GTEC Contour Board is a strong, lightweight and flexible gypsum plasterboard for creating curved walls and for ceilings, used to create imaginative surfaces. It can also be used for renovating internal walls to achieve a smooth surface.
Is normal plasterboard fireproof?
For information all plasterboard is fire resistant, however the likes of fireline etc have a higher fire resistance than wallboard etc, however you may require more or thicker layers of “ordinary” plasterboard to achieve a specific fire resistance.
Is plasterboard 30 min fire resistant?
If the ceiling is plasterboarded, then 12.5mm thick boards are required to give 30 minutes’ fire resistance. You may have to provide an additional skim coat or additional plasterboard to the ceiling.
What plasterboard gives 1 hour fire protection?
Gyproc FireLine 12.5mm is a fire resistant plasterboard that withstands fire for longer to allow for safe evacuation.
Is Plasterboard and gypsum board the same?
Gyprock is also known as gypsum board, drywall, or plasterboard. … But a process was invented in 1894 of setting a layer of gypsum plaster between layers of felt paper that was called Plasterboard.
How do you calculate Plasterboard?
Measure the total square footage of the areas where the drywall will be installed. Multiply the width times the height of each wall or ceiling area, then add all of the quantities together to get a total square-foot amount.
What is standard Plasterboard?
About Our Standard Plasterboard Plasterboard is a panel made of calcium sulfate dihydrate (gypsum) usually pressed between a facer and a backer. It is used to make interior walls and ceilings. This ‘Drywall’ construction became popular as a quicker alternative to traditional lath and plaster.
Is Gyprock a plasterboard?
Gyprock | Products CSR Gyprock is the leading brand of plasterboard in Australia with a comprehensive range of plasterboard, compounds, cornices and associated finishing products.
Should plasterboard be fitted horizontally or vertically?
One of the key things to remember when tackling this job is to hang your plasterboard horizontally rather than vertically. Because of the way the boards are manufactured, they have a ‘grain’ along their length, which means that the best strength is achieved when they’re secured perpendicular to the studwork.
How far apart should battens be for plasterboard?
The battens need to be as close to 400mm apart as possible allowing for the fact that you need the end of a plaster lath to fall on the centre of a batten so the next board can share the same batten.
How thick is plaster over plasterboard?
You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set. 8. Cover the entire surface in one go — don’t stop halfway.
What is plasterboard ceiling?
Plasterboard is a panel made of calcium sulfate dihydrate (gypsum) usually pressed between a facer and a backer. It is used to make interior walls and ceilings. This ‘Drywall’ construction became popular as a quicker alternative to traditional lath and plaster.
How heavy is a 4x12 sheet of drywall?
However total weights in lbs may differ by size and by brand. By the sheet, standard drywall sheeting comes in at: 4′ by 8′ by ½ is close to 52 pounds 4′ by 12′ by ½ is close to 77 pounds.
What's the thinnest drywall?
1/4-Inch Drywall: The thinnest of all the options, 1/4-inch drywall is most commonly used as a skimming material. Mount it over an existing layer of wall to refresh the look and hide old blemishes. It’s ideal for walls with a subtle curve to them.
