For registered pest control companies registered under the BoraShield program, Levels 1-3 cover product replacement, labor and damage repair up to $2500 for a period of 12 years. The mold protection in Levels 4 and 5 covers product replacement for 25 years.
How long will Bora-Care last?
For registered pest control companies registered under the BoraShield program, Levels 1-3 cover product replacement, labor and damage repair up to $2500 for a period of 12 years. The mold protection in Levels 4 and 5 covers product replacement for 25 years.
How long does Bora-Care termite treatment last?
How long will Bora-Care® stay in the wood? Since Bora-Care® is derived from minerals, once the active ingredient diffuses into the wood it will remain indefinitely.
How long does it take for Bora-Care to work?
Bora-Care will take at least 30 days usually to diffuse through the entire piece of wood. This of course depends on the thickness and moisture content of the wood. It starts to work as soon as it begins to penetrate the wood it is applied to.Does Bora-Care need to be diluted?
I. BORA-CARE® is a concentrate which must be diluted with clean water before use. The use of warm or hot water, if available, and an impeller type mixer which can be used with an electric drill aids the dilution process.
How long does Bora-Care last on wood?
Bora-Care will remain for the life of the treated wood, so no retreatments are necessary. 6 of 7 people found this answer helpful.
Can you use Bora-Care indoors?
BoraCare can be used indoors safely. It is considered a green product and is made from natural products. BoraCare is only meant to be applied on wood.
How safe is Bora-Care?
Is Bora-Care Safe for Pets? Bora-Care is safe for pets and humans once treated surfaces have dried. Even though the termiticide continues to work for years, the low toxicity levels mean everyone but the termite colony is safe.Does Bora-Care smell?
BORA-CARE is odorless, colorless and can be directly applied to wood surfaces. … Since BORA-CARE has no odor or toxic fumes, it may not even be necessary to leave your home or office during application. Wood treated with BORA-CARE is non-toxic to people and animals.
How do I permanently get rid of termites?Some of the best ways to get rid of termites is to apply termite-killing products to your home’s exterior, use direct chemicals on the inside of your home, set up termite baits, and spray boric acid in your floors and walls.
Article first time published onHow does Bora care work?
Bora Care works via its active ingredient, borate salt. Borate salts work by taking advantage of a unique feature in the biology of termites, ants and other insects. If ingested by ants, beetles or termites, the insect becomes unable to extract nutrition from its food and starves to death.
Is Bora a non repellent?
Secondly, it isn’t just a repellent or a bait but a little bit of each. Bora-Care’s unique patented blend of glycols in combination with a borate salt provides results that are hard to beat. As soon as beetles and ants attempt to consume treated wood they die. … This alerts the termite colony and they abandon the wood.
What is Bora care made of?
The active ingredient in Bora-Care, disodium octaborate tetrahydrate, is a borate salt compound that is formed from a union of boric acid and borax. It has a very low toxic level to humans and pets, but is very effective against insects and fungus.
How do you inject Bora-Care?
Coated or painted structural wood may be treated by pressure injecting Bora-Care solution into holes drilled into the wood at 8- to 10-inch intervals. Inject at 40 psi for 4 to 6 seconds per hole. exposed surfaces. Allow first application to dry by waiting at least 20 minutes between applications.
Can Bora-Care be used on treated wood?
Answer: Yes, Boracare can (and in many instances MUST) be used on pressure treated wood. As a termite barrier under Section VI of the label it is required to be applied twice to exterior wall sill plate and that is always pressure treated.
How do you inject Bora-Care into wood?
Press and hold the injection tip firmly into each hole and inject Boracare until runoff is observed from other holes, galleries, kick-out holes, etc. You may get splash back if the wood is solid. Release the trigger, wait briefly and withdraw the injection tip.
What is Boracide?
Jecta Diffusible Boracide is a ready to use borate that you inject in wood that acts as an insecticide or termiticide. It will protect wood from termites, powderpost beetles, carpenter ants, wood destroying beetles, and decay fungi with a high concentrate of 40% active disodium octaborate tetrahydrate.
How do you find a termite nest?
What to Look For. Pencil-thick to inch-wide tunnels on foundation and crawl-space walls (above) shelter subterranean termites traveling to and from the nest. If you see cream-colored insects when you break open the tubes, your house is infested. If you don’t, the colony may be dead or using another route inside.
How do condos deal with termites?
To give you a general idea on how to kill termites, here are the methods usually taken in exterminating these pests. One is using liquid pesticide, or more particularly termiticide, and creating a chemical barrier around your apartment or condo so termites will not be able to invade your residence and start a colony.
What smells do termites hate?
Cinnamon, Other Essential Oils Other oils effective against termites, either as repellents or pesticides, are tea tree, clove bud, orange, cedarwood and garlic. Clove bud and garlic oils are two of the most effective oils for killing termites, according to the Journal of Agricultural and Food Chemistry.
Does Bora-Care prevent rot?
Specifically designed to work with Bora-Care, Mold-Care prevents the establishment of dry rot, wet rot and mold. Bora-Care adds additional residual protection against decay fungi and insect infestation. Bora-Care with Mold-Care can be applied to bare wood, plywood, particleboard, drywall and OSB.
How long does Bora-Care need to dry?
Answer: You should allow areas treated with Bora-Care to dry for 24-48 hours before touching or painting them. Most applicators apply two coats of Bora-Care for best results.
Can Bora-Care be used outside?
You can use Bora-Care on any raw wood inside or outside your home, including hardwood floors.
How do you make Bora at home?
- 1 gallon of pre-diluted Bora Care will treat 800 BF. …
- 1 gallon glycol (9.3 lbs) + 3.72 lbs Borax, + 2.48 lbs boric acid. …
- 1 gallon glycol, 4.5 lbs Borax, 3.5 lbs boric acid. …
- 5 gallons for $100 – It probably weighs about 35 lbs.
How do I get rid of powder post beetles?
Surface Treatments- Active infestations present in bare, exposed wood should be treated with a pesticide containing “borate”, such as BoraCare or Timbor. Borate-containing products will pentrate and get rid of Powderpost beetles inside the wood as well as those entering or exiting the surface of the wood.
Can you make Bora care with borax?
We made a batch of the Boracare copy using borax, boric acid, and propylene glycol, but heating propylene Glycol to 260 degrees F is scary (hotter than flash point), and the high concentration of glycol discolored the wood and left a blotchy look. … We made both the 10% and the 15% versions.
