Specially formulated for poorly ventilated decks, docks and low to the ground decks where moisture is a problem, Sikkens Cetol SRD has exceptional performance and durability. It offers easy maintenance with two to three years of protection from a one coat application.
How long does Sikkens deck stain last?
Sikkens states in their literature that you should expect to get 2-4 years life out of their system on a sunny side of a house, and 3-5 years on a shady side. At this point, maintenance should be performed. Maintenance is cleaning the surface gently with bleach, TSP, and water.
Is Sikkens stain water based?
Sikkens Cetol BLX-Pro is a quick drying water based exterior timber finish that is ideal for decks and outdoor furniture providing good durability and flexibility. Its highly transparent finish accentuates the natural characteristics and colour of the wood.
How long does sikkens HLSe take to dry?
Drying times at 20°C/ 65% relative humidity: Dust dry after approximately 3 hours. Recoatable after approximately 16 hours with further coats of Cetol HLSe or Cetol Filter 7 plus. All coatings must be thoroughly dry before applying a further coat.Is sikkens worth the money?
Sikkens is a world class product that is head and shoulders against other deck stains, oils and look alikes. Been using Sikkens for 23 years and have always been satisfied. Not cheap, but worth ever dollar. Takes 24 hours to dry and looks terrific when cured.
How do you remove sikken stains?
Put the stain remover on with roller and brush, or sprayer, let it sit for 20 min, repeat that process power wash immediately don’t let the product dry or you will be wasting time and material while power washing use uniformity and preciseness.
What is Sikkens stain called now?
Now the Sikkens branding has been dropped from the label altogether and replaced entirely with “PPG ProLuxe.” Per their purchase agreement, PPG has now dropped all additional Akzo Nobel trademarked names.
Can you tint Sikkens stain?
The Rubbol Siding Finish, Rubbol Solid Stain, and Rubbol DEK can be tinted using some of the universal tints available. No additives should be added to any of our products as they could possibly slow down drying time, change gloss levels, affect the flow of the product, etc.How do you clean a sikken deck?
- Sweep away dust, cobwebs, leaves and bird droppings.
- Using a hard-bristle brush, scrub the deck with a mild detergent solution to remove embedded dirt, grease and grime. Rinse with fresh water.
- Once the deck is completely dry, apply two to three coats of the timber coating last used on the deck.
GENERAL ADVICE: Do not sand between coats. Always apply coatings along the grain and never across.
Article first time published onCan you use a roller with Sikkens?
For best results coatings should be applied liberally by brush. We do not recommend the use of applicator pads or paint rollers as they tend to spread the product too thin.
How long does Sikkens stain take to dry?
Sikkens Proluxe Cetol SRD Dry Time Drying Time – 24 hours minimum at 68°F and 65% relative humidity. At temperatures below 50º F (10º C) or conditions of high humidity the drying time will be extended. Proluxe Cetol SRD dries to touch in approximately 6 hours. Wait 24 – 48 hours for light foot traffic.
Does sikkens make a solid stain?
ProLuxe Premium Solid Stain Wood Finish is a premium, solid colour stain for decks, fences, siding, and outdoor furniture.
Can I stain over sikkens?
NCPaint1 said: If its cetol 1 it shouldn’t be on a deck in the first place. A semi trans won’t penetrate over Cetol 1, that’s your next problem. Only thing you can do without stripping is a solid stain.
What is the longest lasting deck stain?
Opaque: Sometimes called a “solid deck stain,” this product contains the highest percentage of pigment and will protect wood the longest, requiring a recoat every 4 to 5 years. Opaque stain is also the densest and completely hides the wood grain. It offers the most coverage short of applying a deck paint.
Who makes Sikkens deck stain?
Sikkens is part of AkzoNobel, the largest global paint and coatings company and a major producer of specialty chemicals. AkzoNobel supplies industries and consumers worldwide with innovative products and are passionate about developing sustainable answers for our customers.
Which Sikkens product to use for decks?
Sikkens Proluxe Cetol DEK Finish is a high performance, translucent satin finish for exterior decks. This alkyd high solids formulation offers optimum protection, ultimate durability and a beautiful furniture-like furniture finish appearance with the simplicity of a one product, two coat application.
Are Sikkens and PPG the same?
CRANBERRY TOWNSHIP, PA – PPG announced that its SIKKENS® PROLUXE™ wood finishes will now carry the PPG name. The PPG ProLuxe product line will contain all of the same Sikkens ProLuxe products and formulas, but will now showcase the updated PPG ProLuxe name and new packaging. …
What is the best quality deck stain?
- Ready Seal 105 Exterior Deck Stain. – Best Overall. …
- Penofin Deep Penetrating Deck Stain. – Runner Up. …
- Storm System Penetrating Deck Stain. …
- Cabot Wood Toned Deck Stain. …
- DeckWise Ipe Oil Hardwood Deck Stain. …
- Olympic Stain Maximum Waterproofing Deck Stain. …
- SaverSystem Semi-Transparent Deck Stain.
Who makes TWP Deck Stain?
TWP® stands for “Total Wood Preservative” and has been distributed by Gemini Coatings for over 20 years. TWP® Exterior Wood and Deck Stain is registered as an EPA Wood Preservative and is manufactured using only the highest quality of raw materials.
How many coats does cetol Marine have?
Apply 3 coats of Cetol® Marine. Always allow 24 hours drying time in between coats. Sanding between coats is not recommended as this will result in a reduction of dry film thickness. Recommended film thickness must be applied to ensure effective product performance.
How do you use Sikkens products?
- Apply 1 coat with a good quality, long haired, natural bristle brush in a full flowing coat, laying off in the direction of the grain, using the minimum number of brush strokes necessary.
- Leave to dry for 24 hours.
- Finish joinery with two coats of Sikkens Cetol Filter 7 Plus.
How do you clean cetol sikkens?
Clean with a hose or pressure washer. Wash Sikkens Cetol BL Tannin & Oil Remover from decking boards using a hose or pressure washer. Once completely cleaned, the timber decking boards will look lightened and clean, free from tannin stains, dirt and grime.
How do you remove Sikkens SRD from deck?
Use Benjamin Moore ‘Remove’ and then ‘Brighten’. I might put that in a small spray bottle (or garden sprayer) and mix it 1/2 and 1/2. Agitate with a scrub brush and rinse off. Will be a messy process as it runs off the railings.
How do you remove dried cetol?
You can try to gently scrape off a thick run of cetol with the tip of a scraper. You can try using wet sandpaper to gently sand off drips, but you need to be careful of the surrounding gelcoat. I have found that dried cetol seems to remove better the following year… the sun must soften it.
How do you clean sikkens?
Wash with warm water and liquid detergent solution to remove any contaminants, frequently changing the water. Rinse thoroughly with clean water to remove all residues. Allow to dry. Re-coat with two full coats of Sikkens Cetol Filter 7 (in appropriate colour).
Can you use sikkens on decking?
Sikkens CETOL® WF 761 is designed for Decking in mind and is a Brushable 1K Waterborne Acrylic, High-build, Tranlucent Stain that can be used as a one pot solution on both exterior and interior stable timber components.
Is sikkens Rubbol oil based?
To clear up some confusion, this is an acrylic/oil hybrid, not an oil stain. … Rubbol Solid DEK is an acrylic solid stain. Sikkens provides very detailed preparation and applications instructions for their products and they are there for a reason.
Can you paint over Sikkens stain?
Registered. Personally I wouldn’t paint over sikkens unless I primed it with a great oil primer first…. maybe even sand and then oil prime. Even then I would do a tester first to see how it went.
How do I use sikkens?
Apply liberally to entire area, working the solution into and around the fastener inset areas where iron stains exist. Work into the wood-grain with a stiff bristle brush in a scrubbing motion to accelerate the brightening and cleaning process. Allow the oxalic acid solution to sit on the surface 15-20 minutes.
Do I need to sand between coats of Sikkens?
Do not sand between coats, as this product needs the full application thickness from each coat for its UV effectiveness. … Lightly sand the old finish (with the grain) using 220-grit or 320-grit sandpaper. Remove all sanding residue with a vacuum, and apply a maintenance coat of Cetol.
