What is a refrigerator baffle

The air damper, baffle or diffuser is the device that balances the air flow from the evaporator fan housing. This normally is a mechanically controlled baffle or flapper that controls the amount of cold air entering the fresh food compartment.

What is a baffle on a fridge?

Inside the refrigerator is a series of controls that regulates the temperature inside the unit. In many fridges there is a motorized air baffle that controls the air flow from the freezer of the unit. The baffle is controlled by a thermistor. … A baffle is used to control air intake into the fridge.

Where is the damper located on a fridge?

The damper is a small flap that controls the flow of air from the freezer to the refrigerator. It is usually found in the top of the fridge or on the back panel near the top. The damper is controlled by a thermostat, which triggers it to open and close depending on the temperature of the air in the refrigerator.

How do I know if my refrigerator damper is bad?

Damper Control – Not Opening Or Broken This part opens and closes to let in cold air into the fridge portion. When the damper does NOT open, then cold air does not flow properly. Be sure to visually look at the damper to see if it is stuck closed. If the air damper is broken, replace asap.

Why is my fridge freezing up at the back?

During the cooling process, the humidity/moisture starts to condense on the back wall as this is one of the coldest places in the fridge. These droplets can be frozen, and ice can build up on the back wall. … Hot food or too much fresh food being placed in the fridge before cooling.

What do I do if my fridge is too cold?

To start, unplug your fridge and then find your cold control knob. Set the knob at its midpoint and then plug your fridge back in. At this setting, your fridge should maintain a temperature of about 38 degrees fahrenheit. When doing this, check to make sure the sensor bulb or wire is in place with no signs of damage.

Why is my fridge not getting cold?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. Clean the fan blades and spin the fan by hand to see if it’s stuck.

How do I check the damper on my GE refrigerator?

Damper/Door Switch To check this open the freezer door and remove the shelf above the ice bin inside the freezer. Then press the button door switch and open the fresh food door. Next, look inside the freezer at the top right hand side while still holding the freezer door switch.

Why is my fridge warm but my freezer cold?

Common solutions for: Refrigerator freezer is cold but refrigerator is warm. … If the evaporator fan is not working, the freezer or refrigerator will not cool adequately. To determine if the evaporator fan motor is defective, try turning the fan blade by hand. If the fan blade does not turn freely, replace the fan motor.

How do I know if my damper is working?

Flip the damper into an open position and inspect the registers once more to see if airflow begins. You probably have a bad damper if, when the damper is closed, you feel limited airflow or none at all.

Article first time published on

Why is my refrigerator not getting cold but freezer works?

When the fridge is not cold but the freezer is, the problem is probably tied to one of your refrigerator’s mechanisms not working as designed. … A small fan and motor are mounted near the evaporator, helping draw air over the coils and circulate it to the fridge and freezer.

How do I stop my freezer from icing up?

  1. Keep the freezer inside and away from a hot water heater or furnace. …
  2. Don’t overstock the freezer or leave it too empty. …
  3. Break up large packages into smaller, airtight packages. …
  4. Limit the amount of time the freezer is open.

Should there be ice at the back of my fridge?

The first thing to mention is that water or a layer of ice on the rear interior wall of a fridge is not unusual – in fact, water formation on a fridge’s back wall is a completely normal physical process. Water will always condense and collect at the coldest point because cold air can hold less moisture than warm air.

Why freezer is frosting up?

Frost inside your freezer is caused by moisture coming into contact with the coils inside the appliance and freezing. … This is caused by several factors, including dehydration from changes in temperature within your freezer, exposure to air and food being in the freezer for too long.

Why is my fridge light on but not cold?

Your refrigerator lights are on, you can hear the fan blowing air in the refrigerator, but the air is not cold. … When your refrigerator has working lights, the inner fan (or blower) inside the fridge is still blowing and the air is room temperature, then possibly the problem is the Compressor Start Relay.

Will unplugging a fridge reset it?

Unplug your refrigerator Disconnect your fridge from its power source by removing the power cord from the wall outlet. You may hear some whooshing or knocking noises after you do so; that’s normal. Make sure your fridge stays unplugged for several minutes, otherwise the reset won’t work.

Why is my fridge warm inside?

Refrigerator Is Too Full Your refrigerator stays at the proper temperature thanks to cold air that’s consistently circulated through the appliance. If there are too many items in your fresh food compartment, that cold air may not circulate properly, resulting in a refrigerator that’s warm.

Is 36 degrees too cold for a refrigerator?

The U.S. Food and Drug Administration (FDA) says the recommended refrigerator temperature is below 40°F; the ideal freezer temp is below 0°F. However, the ideal refrigerator temperature is actually lower: Aim to stay between 35° and 38°F (or 1.7 to 3.3°C). … Temperatures above the 35° to 38°F zone may be too high.

Is 37 degrees cold enough for a refrigerator?

The ideal refrigerator temperature is 40 degrees Fahrenheit or below in the main part of the fridge. The optimal temperature for keeping foods cold is 37 degrees Fahrenheit. When you’re wondering what temperature should a refrigerator be, you can put a thermometer inside your fridge.

Is 34 too cold for refrigerator?

A good temperature range for a refrigerator is between 34-38 degrees F (1-3 degrees C). … Temperatures between 34-38 degrees F (1-3 degrees C) will not kill bacteria and mold. Temperatures between 34-38 degrees F slow bacterial growth, but do not kill bacteria.

Where is the damper located on my Frigidaire refrigerator?

The fresh food compartment in your Frigidaire refrigerator is actually cooled by the freezer compartment. The fresh food compartment has a damper installed at the top of the left wall, which allows air to pass from the freezer to the refrigerator compartment.

What does a damper control do?

A damper is a valve or plate that stops or regulates the flow of air inside a duct, chimney, VAV box, air handler, or other air-handling equipment. A damper may be used to cut off central air conditioning (heating or cooling) to an unused room, or to regulate it for room-by-room temperature and climate control.

How much does it cost to replace an evaporator fan in a refrigerator?

PartReplacement Cost (Labor Included)Fan$120 – $150Evaporator Coil$200 – $300Ice Maker$350 – $500Fridge Door$500 – $700

How long should a refrigerator last?

According to the United States Department of Energy, refrigerators last approximately 12 years. At that point, it’s likely time to replace it. Of course, if your refrigerator is not energy-efficient, you may want to consider replacing it before it stops working.

Where is the thermostat located on a GE refrigerator?

The back of the fresh food compartment is where the temperature controls can be found.

Where is the thermostat on a GE refrigerator?

Temperature controls can be found in the back of the fresh food compartment, near the top of the fresh food compartment or on the exterior dispenser control panel.

What is a damper door?

Doors can be loud – especially if they’re not closed carefully. … Moreover, a door damper helps protect the door, hinges, frame and door panel. It works silently and smoothly, safely and reliably. It catches the closing door, cushions the closing motion, pulls it safely into the lock and keeps it reliably closed.

Why is my Frigidaire side by side refrigerator not cooling?

Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.

Is a damper and flue the same thing?

A damper is located in the flue of your chimney. The flue is where the smoke escapes when the fire is going. Dampers are placed inside of the flue to help control ventilation. Your damper should have a chain or handle that you can access in order to open and close it.

How much does it cost to replace a damper?

The cost for a new motorized damper can range anywhere from $100 to $200. The installation process will take a contractor around two hours and will bring between $150 and $250 in labor costs.

Why is the top of my fridge warmer than the bottom?

The air on the top shelves is up to six degrees warmer than on the lower shelves. This is because the cold air drops from the top of the fridge to the bottom – no matter the fridge’s temperature settings.

You Might Also Like