Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
Can you fit a top fix toilet seat to any toilet?
Replacement toilet seats can usually be adjusted to fit older or non-standard toilets; however, the seat must be supported at the contact points or hinges. Most toilet seats are an oval shape, although some may be more of a contemporary square or D-shape.
How do you remove a top fixed toilet seat?
To remove ,the screw locates Into the nut ,one turn. Then press down on the screw. This pushes the coned nut down and releases the expansion / pressure. Then pull the whole thing upward ,with a wiggle, and out.
Which type of toilet seat is best?
- BEMIS 1500EC 000 Toilet Seat (Budget Pick) …
- KOHLER K-4636-0 Cachet Elongated White Toilet Seat (Our Top Pick) …
- TOTO SS154#01 Traditional SoftClose Elongated Toilet Seat. …
- Brondell L60-EB LumaWarm Heated Nightlight Elongated Toilet Seat (Upgrade Pick)
What are the different types of toilet seats?
There are 2 main types of toilet seat: standard close and soft close. Let’s look at these in closer detail. A standard close toilet seat can be contemporary or traditional in style and can come in a variety of materials and finishes. They are easy to fit and can suit a wide variety of bathrooms.
Can I replace a bottom fix toilet seat with a top fix?
3 Answers from MyBuilder Bathroom Fitters yes.
What is the difference between top fixing and bottom fixing toilet seats?
Types Of Toilet Seat Fittings Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
Is a wood or plastic toilet seat better?
Choosing a wood vs. plastic toilet seat depends primarily on personal preference. Wood toilet seats stay warmer and are more comfortable, but can be hard to clean. Plastic toilet seats are easier to keep clean and are more versatile, but can be uncomfortable, especially in the winter.How often should you change your toilet seat?
Q. Why should I replace my toilet seat? While a toilet typically lasts at least 15 years, toilet seats last only about 5 to 7 years before they begin to crack or become stained to the point that, no matter how hard you scrub, they no longer appear clean. That’s when it’s time to consider replacement.
Are all toilet seat hinges the same?There are two main types of hinge fixings, top fixing and bottom fitting, and it is worth noting that not all hinges are suitable for all toilets. Bottom fixing toilet seat hinges feature a traditional style fixing which includes fitting two bolts down into your pan and then tightening them from underneath.
Article first time published onAre there different size toilet seats?
As we said, toilet seats come in two sizes: round and elongated. Every toilet seat is one of these two, indicated on its packaging.
What are the three types of toilet?
- Wall Hung toilets.
- Close Coupled toilets.
- Back To Wall toilets.
Why toilet seats are U shaped?
The U-shaped seat in public restrooms is a requirement of IAPMO’s Uniform Plumbing Code. … The design “eliminates an area that could be contaminated with urine” and also “eliminates the user’s genital contact with the seat.” There is a sensible exception to the Uniform Plumbing Code requirement.
What is bottom fix toilet seat?
A bottom fixing is a more traditional style fixing, with two bolts that fit down into your pan and are then tightened from underneath. Top fixing hinges are used when there is no access to the bottom of the pan, like in some back to wall toilets, or modern one-piece style toilets.
What are toilet seat hinges?
These hinges are located at the rear of the toilet seat. … The design allows you to relocate fresh holes in new locations when your old holes have stripped out, without having to replace your seat.
Why are there no toilet seats in Italy?
Apparently, the toilet seats are there originally but, then, they break. The seats break because people stand on them. People stand on them because they are not kept clean enough to sit on. … Either the proprietors decide there’s no point in continuing the cycle, so they consign their toilet to the ranks of the seatless.
Which last longer wood or plastic toilet seat?
A quality plastic toilet seat will almost always last longer than its wooden counterpart. … While wooden seats offer a luxe appearance and a warm, comfy seating experience, plastic seats can look rather cheap and basic; plus they can get unpleasantly cold in the winter.
How often should I wash my toilet?
Once a week at least. Tetro says your bathroom is the ultimate bacteria host; E. coli can be found within six feet of the toilet and in the sink. To keep it at bay, disinfect the toilet and sink at least once weekly, and the bathtub every two weeks — more if you shower often.
How much does a new toilet seat cost?
The national average materials cost to install a toilet seat is $47.78 per seat, with a range between $28.25 to $67.32. The total price for labor and materials per seat is $133.78, coming in between $106.05 to $161.52. Your actual price will depend on your location, job size, conditions and finish options you choose.
Are MDF toilet seats any good?
The MDF options are the best toilet seats for traditional toilets where cost needs to be kept low, but if you’re not held to a budget then solid wood toilet seats are highly recommended.
Do plastic toilet seats crack?
In general, a plastic seat will last longer, especially the ones that are not too light and cheap. A cheap plastic toilet seat will be flimsy and have tendency to break.
How do you disinfect a wooden toilet seat?
Mix dish-washing liquid or hand soap with water. Wipe down the seat using a non-abrasive cloth or sponge. Use antibacterial soap, hydrogen peroxide or rubbing alcohol to kill germs. Rinse the seat with clean water, and wipe it down with a dry, soft cloth.
How do I stop my toilet seat from sliding sideways?
- Lower the seat and locate the two screw covers at the back of the seat. …
- Put the flat-head screwdriver in the screw slot and hold it steady while you unscrew the nut from underneath the bowl. …
- Remove the nut and bolt and take the seat off the bowl. …
- Insert the screw back in the holes.
How do you open the hinge cap on a toilet seat?
Ensure the hinge caps are in place on the toilet seat. Twist the caps to the left. Grasp them under the two “wings” on either side of the cap and turn the back of the cap toward the left to “unlock” them.
What size are toilet seat bolts?
The bolts have a 7/16-inch diameter that fits most standard toilet seats.
Are all toilet seat screws the same size?
Your seat post holes should measure 5.5 inches, and, if they do, all standard toilet seats will fit your seat post holes regardless of shape.
What is the best material for toilet seat hinges?
The hinge material selection should focus on durability—with stainless steel and zinc-plated options being the most durable and plastic being the least durable. If the toilet seat is in the home’s main bathroom, consider high-end materials. Bolts are available in metal or plastic.
