The Solar Sync ET sensor is an advanced weather sensor that calculates evapotranspiration (ET) and adjusts Hunter controllers daily based on local weather conditions. Solar Sync measures sunlight and temperature, and uses ET to determine the correct seasonal adjustment percentage value to send to the controller.
How do I turn off Hunter Solar Sync?
To uninstall the Solar Sync sensor, simply disconnect the green and black wires from the controller terminal and then turn the dial to the SOLAR SYNC position. The display should show dashes, indicating that the controller no longer recognizes the Solar Sync sensor for calculation of seasonal adjustment.
How does the Hunter rain sensor work?
The two leading manufacturers of irrigation products, Rain Bird and Hunter, both make rain sensors and both detect rain using the same method. They have a series of porous cork discs that when they get wet from rain, they expand and force the sensor to prevent the controller from watering.
How do you adjust Hunter rain sensors?
The Mini Clik uses a spindle adjustment to set the amount of rain you want the sensor to witness before it shuts down the system. This amount can be set by adjusting the spindle on top of the sensor and the range is 1/8″ (3.17mm) to 1″ (25.4mm).Why is my rain sensor not working?
The most common reason is because the sensor has NOT received enough rain to activate. … The rain sensor switch is in the “BYPASS” or “OFF” position. To fix this, slide the switch into the “ACTIVE” position. During installation of the rain sensor, the terminal jumper was NOT removed.
What setting should my rain sensor be on?
IFAS researchers recommend rain sensor thresholds of 1/4” for 2 or 3 day per week irrigation with no more than 1/2” for 1 day per week irrigation. Remember, the lower the setting, the more water saved.
How long do rain sensors last?
How long do rain sensors last? The average rain sensor only functions for 3-5 years before needing replacement.
Do rain sensors Really Work?
Not only will it save you money, but it will conserve water as well. A rain sensor is perfect for individuals who go out of town a lot, or for forgetful people who can’t remember to turn on and off their sprinklers. Sprinkler rain sensors are one of the very best ways to keep your irrigation system working flawlessly.How do I know if my Rainbird rain sensor is working?
The zone should shut off. (If your rain sensor does not have a button on top, it is not a cork-disc sensor) Release the button and the zone should come back on. If it does, the sensor is operating properly.
Are rain sensors worth it?Saving water and money, rain sensors make perfect sense for most irrigation systems. Economical, efficient and easy to install, rain sensors are, indisputably, a good idea. … Conserving water and reducing operating costs, these devices are a beneficial addition to most any system, according to irrigation experts.
Article first time published onHow much does it cost to install a rain sensor?
A: On average, cost for the sensors runs $18 to $40 and installation runs $125 to $150.
How much water does a rain sensor save?
When rain sensors are working correctly, they save lots of water – more than 2,500 gallons per 1,000 square feet annually, say Hillsborough County Extension experts. The most common shutoff device is an expanding disk rain sensor. It is effective, inexpensive, and easy to install and maintain.
Do rain sensors go bad?
The Irrigation Association has determined the average lifespan at 5 years, but I’ve seen them last longer than that. I hope I’ve helped you understand rain sensors and how they work.
How many wires does a rain sensor have?
The modern types usually come with two sensor wires. Connect these wires to the sprinkler controller’s rain sensor terminals. Then, connect one wire to the common wire using a nut, and the other wire needs to be linked to the common terminal.
Do Hunter rain sensors need batteries?
IMPORTANT: The battery inside the transmitter is NOT replaceable. It is sealed with epoxy which allows it to be free of any future corrosion. To perform a battery test on the transmitter, you must view the receiver status to check if there is communication between the transmitter and receiver.
