What makes silly putty bounce

They flow like a liquid or can be stretched slowly. This is because the molecular chains are loosely arranged and can slide past each other. If pulled quickly, the molecular chains break away from each other instead of sliding. The zig-zag shape of the molecules allows the putty and the flubber to bounce like a spring.

Can silly putty bounce?

Silly Putty is a toy based on silicone polymers that have unusual physical properties. It bounces, but it breaks when given a sharp blow, and it can also flow like a liquid.

What is bouncing putty made of?

Silly Putty is made from a mixture of silicone polymers (about 70 wt%) and other chemicals, including boric acid. Powdered fillers (clay and calcium carbonate) and dry pigments (to produce color or glitter) are also added. A homemade recipe can be made from mixing together water, white glue, and borax solution.

How does bouncy putty work?

Silly Putty is made of polymers, or long chains of molecules, that are cross-linked by weak hydrogen bonds. These bonds make the Silly Putty easy to roll into a ball and stick to itself. When the Silly Putty is stretched carefully, the hydrogen bonds break apart slowly and allow the putty to hold together.

How do you make bouncing putty without borax?

1 cup of cornstarch.
1/2-1 cup clear gel-like soap *
Food coloring or gel colors.
A small bowl and spoon for mixing.

Why does Silly Putty break when you stretch it very quickly?

They flow like a liquid or can be stretched slowly. This is because the molecular chains are loosely arranged and can slide past each other. If pulled quickly, the molecular chains break away from each other instead of sliding. The zig-zag shape of the molecules allows the putty and the flubber to bounce like a spring.

How do you make silly putty with borax and glue?

Mix together 1/4 cup glue and 1/4 cup water. Add food coloring if you want colored Silly Putty.
In a separate container, dissolve 1 tablespoon borax in 1/8 cup water.
Stir the borax mixture and glue mixture together to make the putty.

Is Silly Putty polar or non polar?

slime dissolved water soluble inks>> therefore slime was polar. Therefore: the silly putty must be the opposite or non-polar.

Why does Silly Putty stick to silicone?

Because of the silicone compounds in the Silly Putty, the putty clings to rubber and plastics more than other products. According to the official Silly Putty website, the combination of silicone oil and boric acid creates what is referred to as a solid liquid, which allows the product to bounce, stretch and be molded.

What does boric acid do in Silly Putty?

The boric acid helps to create “crosslinks” between adjacent polymer chains. These help to give silly putty its putty-like nature, and also help explain its strange behavior. into a nice round ball. Drop it onto a hard surface.

Article first time published on

Is Silly Putty the same as slime?

Because putty is thicker and more solid than slime, this means different kinds of play. While slime is great for making huge slime bubbles and running gobs of it through your hands, putty usually comes in smaller quantities.

Why is Silly Putty a polymer?

Silly Putty is a polymer made from silicone oil and boric acid. A polymer is a chain of molecules that are all tangled up. … Very weak intermolecular bonds that provide flexibility around the bond and rotation about the chains of the cross-linked polymer hold the silly putty together.

Is Silly Putty toxic to humans?

All Crayola and Silly Putty products have been evaluated by an independent toxicologist and found to contain no known toxic substances in sufficient quantities to be harmful to the human body, even if ingested or inhaled.

How do you make silly putty without cornstarch or borax?

Combine the flour and salt in a mixing bowl.
Stir a few drops of food coloring into the water and stir until it’s well mixed. …
Slowly drizzle the dyed water into the flour mixture while stirring.
Knead the ingredients with your hands until it forms a nice, smooth putty that feels like “Silly Putty”.

How do you make silly putty without liquid starch?

Use Epsom salts instead of borax or liquid starch. Video of the Day. …
Use standard white glue. Pour the white glue into the other cup.
Transfer the salt water to the cup holding the glue.

How do you make silly putty with cornstarch?

Pour the cornstarch and dish soap into a container. Add a few drops of water to help the goop bind, then fold it all together with a spoon. …
Mold the putty with your hands until most of the starch and soap is used up. If the mixture is too dry and crumbly, squeeze in some extra soap. …
Play with it.

How do you make frozen Silly Putty?

Pour your glue into a bowl.
Fill the same bottle with water and add to the glue.
Stir until well combined.
Add a few drops of blue food coloring & stir again.
Add a few sprinkles of the glitter & give it another good stir.
In a separate cup, add 1/2 cup of hot water.

How do you make pop putty?

Some people describe Thinking Putty as chewing gum for your hands. Well, this is like blowing a bubble! Form small, thumb-sized spaces in your putty and then fold it over onto itself. Give the putty a little squeeze to force a bubble to form and then pop it!

How do you make egg Puddy?

For the putty, you just need white glue, liquid starch & food coloring. To make enough for a plastic egg, the recipe calls for 2tbl glue mixed with 1 tbl starch and a few drops of food coloring.

How do I stop putty popping up?

Get in front of a sink. …
Activate the stopper on the sink, if possible.
Turn on the cold water. …
Switch off cold water. …
Let the sink fill with hot/warm water. …
Use cold/lukewarm water to remove any remaining putty from hands, as best as possible. …
Rinse hands in sink.

How do you fix sticky Silly Putty?

Fill a large bowl halfway with hot water so you can soak your putty. Place your putty in the water and begin folding and squeezing it with your hands. Continue kneading it in the water until it feels softer and easier to play with. Fill 2 Ziploc bags with ice cubes, then sandwich your sticky putty in between.

Can you microwave Silly Putty?

Putty can be microwaved. I microwaved the putty in a drinking glass for about 3 minutes. Warm putty is extremely sticky, but when cooled, the putty returns to the same state before the microwaving.

Does Silly Putty pick up newspaper ink?

Printing technology has changed over the years, eliminating the transfer of messy newspaper comic ink to skin. Since nontransferable ink is now used, newspaper comic print will generally not transfer onto Silly Putty as it did in the past. Silly Putty can, however, easily lift pencil marks from paper.

Is Silly Putty ionic or covalent?

Silly Putty is primarily polydimethylsiloxane (PDMS). There are covalent bonds within the polymer, but hydrogen bonds between the molecules. The hydrogen bonds can be readily broken. When small amounts of stress are slowly applied to the putty, only a few of the bonds are broken.

Why does Silly Putty pick up newspaper ink?

Silly Putty® continued works well with freshly-prepared putty as the putty tends to harden with age.) The Silly Putty will pick up the pictures from the newspaper, but not from the magazine. This is due to the type of inks used.

Why is borax called a cross linker?

Borax forms the borate ion when in solution. This ion has the structure: The borate ion can make weak bonds with the OH groups in the polymer chains so it can link the chains together as shown below. This is called cross-linking.

How does temperature affect Silly Putty?

In other words, over long flow times or at high temperatures, Silly Putty behaves like a highly viscous fluid. But over short flow times or at low temperatures, it behaves like an elastic solid.

Can Silly Putty dry out?

SILLY PUTTY is made primarily from silicone and color pigments. Silicone is an oil-based product and by nature will not dry out. If Silly Putty is left out of the container over a period of several years, it may harden due to other ingredients contained in the putty.

Is Silly Putty an amorphous solid?

Amorphous solids have a lot of disorder to their molecular arrangement (they are confused!) Examples of amorphous solids are silly putty, glass and rubber. Purpose: Three substances are mixed together in a plastic bag.

How do you make Silly Putty with boric acid and silicone oil?

With stirring using a stirring rod, add 5% by weight of boric acid to the flask. Your oil should become very viscous so mix it well. Heat the mixture using a 180 oC oil bath for 1.5-2.5 hours. The longer the reaction time, the better your product should be.