What size is a 40 chain

SizePitchMaximum Roller Diameter410.500 in (12.70 mm)0.306 in (7.77 mm)400.500 in (12.70 mm)0.312 in (7.92 mm)500.625 in (15.88 mm)0.400 in (10.16 mm)600.750 in (19.05 mm)0.469 in (11.91 mm)

What size is number 40 chain?

Chain SizePitch (P)Weight (Per Ft)#40-10.500″0.42 LBS#41-10.500″0.28 LBS#50-10.625″0.68 LBS

What Is a Number 40 chain?

#40 roller chain is a 1/2″ pitch ANSI B29. 1 industrial duty roller chain that is manufactured with precision components and high-strength carbon steel alloys. … #40 roller chain is one of the most common chain sizes used around the world today because of its versatility and productive nature.

Is a 420 chain same as 40?

We use the #420 chain the most out of these 3. It’s not as wide (from side plate to side plate) as the #40 chain which helps to not slap your driven pulley or frame if it’s in a tight fit. #420 will have more strength than the #41 chain because the side plates will be taller.

What is the pitch of a #40 chain?

We know that from the ANSI numbering system, ANSI 40 chain has a pitch of 4/8s of an inch or . 5 inches.

How do I know my chain size?

To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.

What size is 41 chain?

SizePitch (P)Overall Width (A)41-10.50″0.539″

What is a 410 chain?

410 roller chain is a non-standard series roller chain that is a common in stock item for USA Roller Chain. … This 410 roller chain also is supplied with a high-quality lubricant for additional working life. We stock this chain in 10ft boxes, 50ft reels, 100ft reels, 250ft reels, and cut to length strands upon request.

Will a 40 chain fit a 35 sprocket?

No. A #40 chain is 1/2″ between the pins and 5/16″ inside width. A #35 is 3/8″ between the pins and 3/16″ inside width. There is no way it will work.

How do chain sizes work?

Chain size is commonly referred to as Pitch. In actuality, chain size is determined by the chain pitch. Pitch refers to the measurement from one roller-pin center to the next roller pin center of a given chain.

Article first time published on

What size is a 420 chain?

Part No.420Plate Thickness (T)0.060Overall Width (F)0.288Overall Width (G)0.344Unit of Measure (Inches or Millimeters)in

What size is a 50 chain?

SizePitch (P)Overall Width (A)50-20.625″1.513″50-30.625″2.230″50-40.625″2.943″

What size chain do I need for my chainsaw?

To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.

How do I know my bike chain size?

Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.

What are the different chain sizes?

SizePitchMaximum Roller Diameter500.625 in (15.88 mm)0.400 in (10.16 mm)600.750 in (19.05 mm)0.469 in (11.91 mm)801.000 in (25.40 mm)0.625 in (15.88 mm)1001.250 in (31.75 mm)0.750 in (19.05 mm)

What does 520 mean on a chain?

(3) The size of a chain is designated by a three-digit number (520, for example). The distance from the center of one pin to the center of the next is called pitch. Pitch is represented by the first digit, which is 4, 5 or 6.

What is the difference between a 530 and 520 chain?

A 530 chain on a 520 sprocket will work just fine, a 532 will not. The differance between a 520 and 530 is the width, the roller diamiter and pitch are the same.

What does a 420 chain mean?

For example, a 420 chain has a pitch of 4/8″ = 1/2″ (12.70mm) and a roller width of 2.0/8″ = 1/4″ (6.35mm).

What is the pitch of 420 chain?

Specifications: Chain No.: 420; Pitch: 1/2″; Roller Width: 1/4″; Roller Diameter: 5/16″; Sprocket Thickness: 0.227″.

What is the difference between a 415 and 420 chain?

#415 and #415H chain is also known as 1/2″x3/16″ chain. #420 chain is the exact same size as #41 chain however it has thicker pins which makes it stronger. #420 chain is used on motorcycles, mini bikes, go karts, and motorized tricycles.

What size is a 415 chain?

#415 chain is also known as #43, 083, and 1/2″ x 3/16″ chain. #415 chain has a 1/2″ center to center spacing between each pin, a 3/16″ spacing between inner links, and is approximately 7/16″ wide.

How do I tell what grade my chain is?

Just look for the “L” and then the number after it. Each number following the “L” corresponds with a grade of chain. On grade 70 this can also show that the chains are DOT approved! The “L” represents Laclede and our commitment to high quality chain products.

What size chain goes on a go kart?

Most go kart chains and mini bike chains have the chain size stamped directly on the chain links. #35, 40, 41, 420 and 50 chain are used on American Go Karts and Mini Bikes. An 11 or 12 tooth clutch sprocket usually indicates the use of 35 chain.

Is 41 and 415 chain the same?

The #41 chain is a strong alternative chain that replaces the 415 & 410 motorized bike chains.

Will a 428 sprocket fit a 420 chain?

A 420 and 428 are the same except width and the pins may be a little bigger diameter on the 428. They shouldn’t be though. Pin length should be the only difference.

What size is a 428 chain?

Part No.428Plate Thickness (T)0.060Overall Width (F)0.324Overall Width (G)0.371Unit of Measure (Inches or Millimeters)in

What size is 80 chain?

80 roller chain is defined as a 1-inch pitch chain as signified by the first number “8” in the chain part number. Pitch value is determined by dividing the first number of chain part number by 8 (8/8=1” Pitch). PEER roller chains conform with ANSI/ASME standards for all standard roller chain sizes from 25 to 240.

Can I put a longer bar and chain on my chainsaw?

Yes, but you need a bar designed to fit on your saw. There are different designs for different saws, and the bar has to match the chain/sprocket configuration as well.

How long is a 16 inch chainsaw bar?

Start your tape measure on one end of the bar and extend the tape to the tip on the other side to find the true length. Round the measurement to the nearest inch to know the true length of the chainsaw bar. For example, if the measurement is 16 1⁄3 inches (41 cm), then the true length of the bar is 16 inches (41 cm).