What width are gravel boards

Types of Concrete Gravel Boards Depending on how high you wish to raise your fence panel, our concrete gravel boards come in 6 inch and 12 inch options.

Should concrete gravel boards be in the ground?

If the ground is level then just sit the gravel board on to it, no need at all the sink it into the ground. If the ground isn’t level then just sink one end into the ground to level the board, this though will involve stepping the bay’s as the ground raises.

What size do concrete posts come in?

Concrete gravel boards Posts with 4-way weathered tops are available from 1,500 to 2,700mm long and round top posts are available from 1,500 to 3,600mm long.

Can you cut gravel boards to size?

Cut the boards to size with an angle grinder fitted with a diamond disk. Make sure you have a diamond-studded blade or another disk that works on concrete. To use the angle grinder, hold onto it with both hands and move it slowly along the board. Cut across the boards first to trim them to the proper length.

What is concrete gravel board?

What is a gravel board? A gravel board is a piece of wood or concrete that goes under your fence panels and sits on top of the ground beneath. Their primary purpose is to keep the fence panel off the ground, to ensure it does not come into contact with grass, plants or the wet ground.

Can you drill into concrete gravel boards?

Yes, you can drill through concrete gravel boards with relative ease when using the correct tools and techniques. Hammer drill, rotary hammer and masonry drill bits are the preferred choice for drilling into concrete.

How deep should gravel boards be?

Dig your hole to the correct depth, allowing for the height of the fence panel and the gravel board. As a rough guide the hole should be a minimum 1/3 the height of the fence, so a 6 foot fence would need an 8 foot post in a 2 foot deep hole. Similarly, the hole should be three times the diameter of the post.

How heavy is a concrete gravel board?

TypeRecessed Concrete Gravel BoardWeight26kg (Approx.)

How long do concrete gravel boards last?

How long a gravel board lasts really depends on what it’s made from. If it’s made from untreated timber then the best you can expect is probably a few years tops and it will need replacing. If their constructed using good quality pressure treated timber then you can reasonably expect anything up to 7 or 8 years.

How do you secure a gravel board?
  1. With slot-in fence posts: make sure the posts are secured for the correct distance for your panels. …
  2. With clips: install the clips into the centre width-ways of your fence post at the height you require. …
  3. With wooden blocks: Make some wooden blocks out of pine or cedar.
Article first time published on

Can you use gravel boards for fencing?

Installing gravel boards will increase the durability of your fence. So, although they come at an extra cost, they’ll save you money in the long run. By closing any unsightly gaps at the bottom of your fence, gravel boards also help create a neater and cleaner looking fence, while ensuring complete privacy too.

What size posts do I need for a 5ft fence?

Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.

How far apart do you put fence posts?

Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.

What size are concrete fence posts?

Varying in lengths from 4’6″ up to 10′ depending on fence height. They have a grey concrete coloured finish. These concrete fence posts are available in the following size(s): Post length 4ft6 which is for an overall fence height of 3 foot.

Is 2 ft deep enough for fence post?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

How thick is a gravel board?

DimensionsN/AGravel Board6ft (1.83m), 10ft (3m), 14ft (4.2m)

Can you use concrete gravel boards as a retaining wall?

You can use gravel boards for a retaining wall, but it is important to consider the advantages and disadvantages of doing so. … But if you don’t use a strong foundation, then the retaining wall will be very unstable, and it may collapse within a few years.

Can I use gravel boards for decking?

6×1 Gravel boards Resilient and durable, Decking Delivery’s Gravel Boards are the perfect foundation to your fencing. Used as the protective barrier between the ground and your fencing, preventing rot and decay. Decking Delivery’s 6×1 gravel boards can also be used to enhance a buildings exterior.

Which way do gravel boards go?

gravel boards somtimes I do put the rough side facing the other way if it is not going to show i.e if it is below ground level on the one side.

How do you lay a concrete gravel board on a slope?

  1. Start at the top of the slope and work downhill. …
  2. Dig a hole for each post to a minimum of 600mm deep. …
  3. Use either a ballast and cement mixture or post mix concrete to install cement fence posts.
  4. Slot concrete gravel boards into each concrete post.

How deep should a 8 foot fence post be?

In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.

Can you put hanging baskets on concrete posts?

Designed to slot over the top of a concrete fence post, these hanging basket hooks enable you to hang baskets along a fence. Great to break up long stretches of fence panels with some colour. The size of the bracket end that sits over your fence post is 10cm wide by approximately 3.6cm deep.

What is DuraPost?

DuraPost® is a complete fencing system of steel fence posts and caps, corner posts, gravel boards and capping rails that can be used with both prefabricated fence panels and close board fencing with Arris, Cant or 3×2 rails.

Do fence posts rot in concrete?

Unlike wooden fence posts concrete is not a degradable material and cannot be penetrated by rot or insect attack which is why people choose to opt for concrete over timber.

Are gravel boards heavy?

Gravel boards are very heavy and I’ve had to lift many over the years in my ‘sometime’ position of delivery driver in the SW of England.

Are timber gravel boards good?

Timber gravel boards are often preferred by people who would like to maintain a traditional look to their fence, especially with decorative fence panels. Concrete Gravel Boards: Concrete is an ideal material for gravel boards, since it is strong and does not rot like timber.

Are gravel boards treated?

They are really great gravel boards. They are wood. They are treated. … 5/5 for the loverly gravel boards.

Are all fence panels 6ft wide?

Fence panels come in a standard width of 6 feet. Heights include 3ft, 4ft, 5ft and 6ft. Trellis panels also come in 1ft and 2ft heights, ideal for fence toppers, planter trellis and wall trellis. 3 foot and 4 foot fence panels are most commonly used for low level fencing such as a front garden boundary.

How deep should a 7 foot fence post be?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.

Should you cement fence posts?

Do Fence Posts Need To Be Set in Concrete? No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.

You Might Also Like