Where are Basco shower doors made

Where are Basco shower doors made? Since 1955, Basco has been fabricating the highest quality shower enclosures at various manufacturing plants in the Greater Cincinnati area. In 1992, Basco moved to its current production facility in a northern suburb of Mason, Ohio which serves as our headquarters for all operations.

How do you replace shower doors?

1. Step 1: Remove the Panels.
2. Step 2: Loosen the Jambs.
3. Step 3: Remove the Bottom Track.
4. Step 4: Scrape Away the Excess Caulk.
5. Step 5: Secure the Bottom Track.
6. Step 6: Install the Side Tracks.
7. Step 7: Make Sure the Track is Level.
8. Step 8: Fasten the Jambs.

How do you fill a gap between shower doors and walls?

If your gap is smaller than 1/8 inch in width, use regular caulk; fill gaps larger than 1/8 inch with a sanded caulk. Make sure the gap is clean and dry, then squeeze a thin, even bead of caulk into the space. To get the best coverage, cut the tip of the caulk tube so the bead that emerges completely fills the gap.

Do shower doors need studs?

Glass shower doors and walls that make up enclosures tend to be very heavy. As such, they need to be supported by fasteners that go into wall studs and not only into drywall. If they are not supported by a stud, then a glass shower enclosure could pull out of the drywall and ruin the entire installation.

Do you install shower door before tiling?

Install a Framed Shower Door Before you set the pieces in place and mark the positions of the holes, lay masking tape on the tile. Besides stopping the bit from wandering, it will make it easier to mark the holes. … Apply a bead of silicone caulk to both sides of the frame and install the door.

Who owns Basco?

Our parent company was founded by the Cronin family of Portland, Oregon. We are proud to be a fifth-generation locally-owned and family-operated business since 1878.

Which side should sliding shower door open?

DreamLine does recommend that the sliding panel be on the side of your shower head. This places the flow of water away from the overlap, minimizing the possibility of leaking between the doors.

Can a glass door be installed on a fiberglass shower?

While most heavy glass doors are not recommended to be installed on fiberglass or acrylic units, Basco offers heavy glass doors that are suitable for these kinds of bases.

Can a frameless shower door be install on a fiberglass shower?

Semi-frameless showers can be installed on fiberglass, unlike heavier frameless showers which need to be installed on tile or marble. … While no shower is completely watertight, semi-frameless enclosures often offer a more watertight solution than frameless enclosures.

Can you hang a shower door on glass tile?

Glass tiles are not meant to bear weight. They will crack. It happens almost every time we try to anchor a door to a wall. They can crack when we drill into them, but most likely not at this stage.

Article first time published on

How do you remove shower door rollers?

Lift up and pull outward in order to dislodge the door from the shower door frame. With the shower door removed from the shower door frame, take a screwdriver and remove the shower door rollers. Simply loosen the screw (should be a Philips head screw or hex screw) and pull the roller off of the shower door.

How do you remove overlapping sliding shower doors?

1. Step 1: Unscrew the Stopper. At the bottom of the glass door, you will see a small black rubber stopper. …
2. Step 2: Gently Pull out the Doors. …
3. Step 3: Place the Doors in a Safe Location. …
4. Step 4: Clean! …
5. Step 5: Reinstall the Doors.

How hard is it to put in a shower door?

Installing a shower door is usually a very straightforward project. Learning how to install a shower door is simply a matter of the right tools and good technique. Most pivot doors are designed to be reversible and can be installed with the pivots on the right or left side of the enclosure.

How much space should be between shower glass and ceiling?

Leave a space at least 6-12″ between the top of the shower enclosure and the ceiling.

What are semi frameless shower doors?

Semi-Frameless Shower: This shower enclosure features a mix of framed glass and frameless glass. The glass used in this type of shower is a bit thicker than in a framed shower, and usually the door of the enclosure is frameless.

How much space should be between shower and tile pan?

Leaving a 1/16″ gap between the tub and tile will prevent the tile from cracking when the tub expands. Plus, a 1/16″ gap allows the caulk to properly fill the space and waterproof the transition between the tile and tub or shower.

What can I use instead of caulk?

Spray foam can be used in some places where you would normally use caulk. In fact, according to OldHouseWeb.com, expanding polyurethane foam is ideal for filling larger gaps around windows and doors. Latex spray foam is also available.

How do you adjust the alignment on a glass door?

1. Have a partner hold the door while loosening the screws on the bottom hinge using a screwdriver.
2. Loosen the hinges from the bottom to the top. …
3. Hold a carpenter’s level at the top of the door and adjust the door until it is level. …
4. Tighten the hinges again.

Can you install shower door without drilling?

A shower enclosure with sliding doors that may be easily installed without any renovation work, without drilling holes, with no hassle or noise. … The enclosure may be easily installed by fixing it to the wall with a high-quality adhesive, so that the use of the drill is only an option.

Where do you start when tiling a shower?

1. Start tile on a level board. Screw a straight board to the level line and stack tile on the board.
2. Close-up of improper spacing.
3. Don’t start on the edge of the tub or shower. Don’t start the first row of tile by resting it against the tub or shower.