Why is my washer blinking UE

A UE error code on your LG front-load washer means the washer won’t spin because the load is unbalanced. Fixing an LG washing machine UE code can be as easy as redistributing an unbalanced load or adding a few garments to a small or single-item load.

How do I fix the UE error on my LG washer?

Run rinse and spin cycle without load. Empty the drum completely. Power the unit on. …
Request Repair. If the uE or UE error displays again, the unit is not working properly; it requires a repair service. …
Leveling, load distribution, and selected washing cycle. The unit does NOT require a repair service.

How do I fix my washing machine off balance?

Level the Machine A carpeted surface can throw this balance off. If your washer is located on a pedestal, the problem can be amplified. Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor.

How do I reset the UE code on my LG washer?

Make Sure the Load is Balanced. …
Run a Rinse and Spin Cycle. …
Check That the Washer Is Level. …
Adjust the Legs to Level the Washer. …
Check the Leveling Legs. …
Check the Rotor Mounting Nut. …
Check the Suspension Rods or Shock Absorbers. …
Check the Hall Sensor.

How do I level my LG true balance washer?

Place a level across the top of the washer. Loosen the lock nuts on all four leveling feet, until you can turn the feet with the included wrench. Turn the bolts clockwise to raise the washer, or counterclockwise to lower it. Do this until the bubble on the level stays right in the middle.

Why is my LG front load washer not draining?

Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.

How do I get my LG washer to spin only cycle?

To activate the spin only feature on your LG top load washer, press the Special Use selection button. And choose spin only. At this time selected the desired spin speed by pressing a spin speed selection button. Note that the no spin option is not available for top-load washers.

Why does my LG washing machine shake violently?

This may be as a result of an unbalanced load caused by the types of fabric you mixed during the washing cycle. The unbalanced weight distribution of the load can cause this shaking or vibration. It is common in large/bulky items such as bedding (sheets, blankets), and rugs.

Why is my washing machine banging when spinning?

If your washing machine makes a loud rumbling or repetitive banging sound, which is particularly bad on a spin cycle, then it is most likely due to loose or worn out drum bearings.

How level should a washer be?

The washer must be level both from front to back and from side to side, and all four of its feet must be touching the ground. If you can rock the machine back and forth diagonally from corner to corner, its feet are not secure and level.

Article first time published on

What does the key symbol mean on a washing machine?

When the child lock is activated, there will be a key symbol in the display and all the washing machine buttons will be disabled. To deactivate the child lock, press and hold the start button for three to five seconds.

How do I turn off the cycle on my LG washer?

The easiest way to reset your LG washer if you need to interrupt a cycle or add to a laundry load already started is to simply press the Power button to cancel the cycle. Once you turn the machine off, it cancels the settings and resets the washer for use.

How do I drain the water from my LG top load washer manually?

Press POWER to turn the washer on. Press the SPECIAL USE key until SPIN ONLY is lit. Press the START/PAUSE button to begin the cycle. The unit should begin a SPIN ONLY cycle and attempt to drain any remaining water that is inside the washer.

How do I stop my washing machine mid cycle?

Press the “Start/Pause” button on the front of your washing machine and wait a few minutes for the washer to safely drain away water in the drum before it unlocks the door. Once this is done, you’ll be able to open the door and add/remove items or make chances to the cycle.

How do I force my LG front load washer to drain?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

Why isn't my washer draining?

There are a few possibilities why your washing machine won’t drain. … Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.

Why is my washer not draining or spinning?

If your washer won’t drain or spin, the water level control may be faulty. Open the machine’s control panel and look for a plastic tube attached to the water level valve. If it’s clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.

Why is my LG washer so loud during spin cycle?

LG Washer is Overloaded or Imbalanced. When you hear an LG washer banging on spin cycle it may be due to overloading or an imbalanced load. Overloading a washer by filling it to the top can make a spin cycle louder. This is because the washer drum has to work harder to spin water from so much clothing.